Samsung C24B750X User Manual page 28

Using Smart Station
Using the Wireless-connection Dongle as a Hub
Wireless Connection is supported on Series 7 only.
For details on how to use a USB cable as a hub, refer to "Using the Product as a USB
Hub" (page 31).
Connect various source devices (peripherals, etc.) to the product using it as a hub.
• A PC cannot connect to multiple source devices at the same time because there are
a limited number of input/output ports available. The HUB feature of the product will
improve your work efficiency by allowing you to connect source devices (peripherals, etc.)
to the USB ports on the product without the need to connect them to a PC.
• Connecting source devices to the product will make your work area tidy and improve the
portability of your notebook PC compared to when connecting them to the notebook PC.
The product has one mobile port and three USB ports (including one Ethernet port).
-
Refer to page 17~18 for further details on the ports.
• Connect a mobile device such as an MP3 player or smartphone to the product when
connected to a PC. This allows you to control the device from the PC or charge the device
battery.
NOTE
• To detect and start a source device faster, connect the device to the blue USB 3.0 port on the product.
• An external mass-storage HDD requires an external power supply. Be sure to connect it to a power
source.
• High-speed charging is possible using the [
device twice as fast compared to when charging using a standard USB port.
• Battery charging is possible in power-saving mode. However, it is not possible when the product is
powered off.
• Note that the battery will not be charged if the power cable is disconnected from the power socket.
• Mobile devices should be purchased separately.
] port only. This port allows you to charge a mobile
28