Using Smart Station
3. Automatic installation may not be supported depending on your PC system settings.
If automatic installation does not work, run Windows Explorer. Open My Computer –
Removable media device drive and check the software. Finally, double-click the software to
proceed with installation. Alternatively, install using the software program on the provided
CD.
• Install using Explorer
A virtual installation driver will appear. Double-click the icon to install the program.
NOTE
•
It may take a while for the virtual driver to appear.
•
Do not remove the cable or turn off the product until install is complete.
• Install using the CD
Run the provided CD, then select the desired language.
Click SAMSUNG Smart Station to install the program manually.
NOTE
•
Loading the install file may take a while.
•
Do not remove the cable or turn off the product until install is complete.
4. After installation, make the required connections and use the product as instructed below.
-
For Series 5 users
Press the [
] button on the front of the product to change
Alternatively, press the [
] button to change the input source to USB.
For Series 7 users: Disconnect the USB cable. Next, connect the wireless-connection
-
dongle to a USB port on the PC.
Press the [
] button on the front of the product to change
Connection. Alternatively, press the [
Connection.
NOTE
Wireless Connection
is supported on Series 7 only.
Select Source
to USB.
Select Source
to
Wireless
] button to change the input source to
Wireless
22