Finding Blockages - Dyson DC07 Owner's Manual

Finding blockages

CAUTION
• Turn power off and unplug
before checking for
blockages. Failure to do
so could result in electric
shock or personal injury.
• If any part of your
machine becomes
blocked, it may overheat
and then automatically
shut off. Unplug
machine and leave to
cool down.
Please note: Clearing
blockages is not covered
by your machine's limited
warranty.
Beware of sharp objects
when clearing blockages.
Check tools are clear of
blockages.
Replace all parts of the
machine before using it.
If you hear a loud rachet
noise it means the
brushbar is obstructed.
Disconnect the machine
before removing the
obstruction.
DC14 wand
A
B
C
A Release wand from U bend inspection
vacuum by pressing hose
C Tilt machine forward, slide
button and sliding hose
out U bend and check
off wand. Check inside
inside for blockages.
wand and hose for
Airway inspection
blockages.
D Squeeze valve release
B Press hose release button
buttons and check inside
at front of machine and
for blockages.
slide hose out with lower
cord hook at rear.
11
D
Brushbar obstructions
Lie cleaner on its front.
Undo soleplate fasteners
using a coin and remove
soleplate.
Remove lint and hair from
brushbar.
Replace soleplate and
tighten fasteners.
Ensure soleplate is fitted
correctly when replacing.