Dyson DC07 Owner's Manual page 13

Changing/fitting the
belt
CAUTION
• Ensure soleplate is in
correct position before
use.
E Use back of cleaner as
lever, loop belt around
thumb. Turn the belt 90
degrees, stretch and
release over spindle.
Belt must be free of twists
as shown.
Optional:
A
B
E
F Rest the three tabs on Optional: Upholstery tool
inside of yellow bumper
A Release catches and
strip and secure soleplate
remove the soleplate.
back into position.
B Remove both brushbars
G Ensure soleplate is in
and clear away thread
correct position before
and hair.
use.
13
maintaining the Upholstery tool
C
D
E
C To reassemble, match the
arrows on the brushbar to
the arrows on central
support.
D Align front of soleplate
with front of tool and
secure all 3 catches.
E Ensure slider is set as
shown.