Edge Cleaning; Automatic Adjusting Nozzle; Thermal Protector - Panasonic MC-UL427 Operating Instructions Manual

Bagless jet force upright vacuum cleaner with 9x cyclonic technology
Hide thumbs Also See for MC-UL427:
Table of Contents

Advertisement

Pivot Point
Point d'articulation
Botón de liberación
Nozzle
Tête
d'aspiration
Boquilla
Deep Pile Carpet
Moquette à poils longs
Alfombra de pelo largo
➢ This vacuum cleaner has a thermal protector which automatically trips to protect
the vacuum cleaner from overheating.
➢ If a clog prevents the normal flow of air to the motor, the thermal protector turns
the motor off automatically. This allows the motor to cool in order to prevent
possible damage to the vacuum cleaner.
TO CORRECT PROBLEM:
➢ Turn the vacuum cleaner off and unplug the power cord from the outlet to allow
the vacuum cleaner to cool and the thermal protector to reset.
➢ Check for and remove clogs, if necessary (See REMOVING CLOGS p. 50, 52).
Also check and replace any clogged filters and empty dust bin, if necessary.
➢ Wait approximately fifty (50) minutes and then plug the vacuum cleaner in and
turn back on to see if the motor protector has reset.

Edge Cleaning

Automatic Adjusting Nozzle

Shallow Pile Carpet
Moquette à poils courts
Alfombra de pelo corto

Thermal Protector

This model is equipped with an edge
cleaning feature for cleaning carpet
edges near baseboards and stationary
furniture.
➢ The nozzle of your Panasonic
vacuum cleaner automatically
adjusts to any carpet pile height.
➢ Feature allows nozzle to float evenly
over carpet pile surfaces.
➢ No manual adjustments required.
- 30 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mc-ul423Mc-ul423t

Table of Contents