Getting Started; Setting Up; Connecting The Telephone Line Cord - Panasonic KX-TG9472B Operating Instructions Manual

Getting Started

Setting up

Connecting the AC adaptor/corded
handset
R Use only the supplied Panasonic AC adaptor
PQLV219.
n Base unit
B
A
Correct
A
A
B
B
R The words "UP DESK" should be facing up.
8
B
A
(120 V AC, 60 Hz)
Wrong
For assistance, please visit http://www.panasonic.com/help
n Charger
(120 V AC, 60 Hz)

Connecting the telephone line cord

Refer to one of the following methods depending
on your situation:
– To connect to a 2-line telephone jack: page 8
– To connect to 2 single-line telephone jacks:
page 8
– If you use the unit as a single-line telephone
only: page 9
Connect the telephone line cord until it clicks into
the base unit and telephone line jack.
To connect to a 2-line telephone jack
"GREEN" plug
4-wire cord
To 2-line telephone
jack (RJ14C)
To connect to 2 single-line telephone jacks
"Transparent" plug
"GREEN" plug
To single-line
telephone jacks (RJ11C)
Line 1
Line 2
Hooks
"Click"
"Click"
2-wire cord
4-wire cord