Table of Contents
Advertisement
8. Programmable Features
Feature
Changing the fax
activation code
Setting the memory
reception alert
Setting friendly
reception
Setting the fax voice
guidance
Changing the recording
time for your TAM/FAX
greeting message
Setting the incoming
message monitor
Setting the Error
Correction Mode (ECM)
40
Feature code
Selection
If you wish to use an extension telephone (page 27) to receive
{#}{4}{1}
faxes, activate this feature and program the activation code.
{0} "OFF"
{1} "ON" (default)
1. {MENU} i {#}{4}{1}
2. Press {1} to select "ON". i {SET}
3. Enter your code from 2 to 4 digits, using 0-9, {*} and {#}.
4. {SET} i {MENU}
To alert you with a beeping sound when a received fax document
{#}{4}{4}
is stored into memory due to some existing problem.
{0} "OFF": Deactivates this feature.
{1} "ON" (default): You will hear a beeping sound.
Note:
L The slow beeps will continue until you clear the printing
problem and make sure the unit is supplied with enough paper
to print the stored document.
To receive a fax automatically when you answer a call and hear a
{#}{4}{6}
fax calling tone (slow beep).
{0} "OFF": You have to press {FAX START} for fax reception.
{1} "ON" (default): You do not have to press {FAX START} for fax
reception.
If you wish to hear voice guidance for fax transmission/reception,
{#}{4}{7}
activate this feature.
{0} "OFF"
{1} "ON" (default)
{2} "ERROR": To hear voice guidance only when fax
transmission/reception fails.
{1} "16s" (default): Maximum recording time is 16 seconds.
{#}{5}{4}
{2} "60s": Maximum recording time is 60 seconds.
See page 33 for details.
To hear an incoming message (ICM) from the speaker when the
{#}{6}{7}
answering machine is recording the message.
{0} "OFF"
{1} "ON" (default)
This feature is available when the transmitting/receiving fax
{#}{6}{8}
machines are ECM compatible.
{0} "OFF": Deactivates this feature.
{1} "ON" (default): If there is an error during fax
transmission/reception, the fax machine will support the
communication.
Note:
L You cannot change the setting when received documents are
in memory.
L The default code is ";#9".
Hide quick links:
Advertisement
Table of Contents
