Wireless Remote Controller - LG UV36.NKD Owner's Manual

Wireless Remote Controller

This air-conditioner is equipped with wireless remote controller basically. But if you want to be
available with wired remote controller, you pay for it.
1
2
3
4
5
6
7
Operation Mode
Cooling Mode
Auto Mode or Auto Changeover
Dehumidification mode
Heating Mode
Fan Mode
• Cooling Model( ), Heat Pump Model(
1
PLASMA Button (OPTIONAL)
Used to start or stop the plasma-purifica-
tion function.
2
JET COOL Button
Speed cooling operates super high fan
speed.
3
OPERATION MODE SELECTION Button
Used to select the operation mode.
4
FUNCTION SETTING Button
8
Used to set or clear Auto Clean, Smart
Clean, Electric heater or Individual vane
angle control
9
5
LCD LUMINOSITY Button (OPTIONAL)
Used to adjust LCD luminosity
10
6
SMART CLEAN Button (OPTIONAL)
11
Used to start or stop Smart Clean.
12 7
CLEAR ALL Button
Used to clear all timer.
13
8
ROOM TEMPERATURE SETTING Button
14
Used to select the room temperature.
9
15 ON/OFF Button
Used to turn on/off the unit.
10
INDOOR FAN SPEED SELECTION Button
16
Used to select fan speed in four steps
low, medium, high and chaos.
11
UP/DOWN AIRFLOW Button
Used to stop or start louver movement
and set the desired up/down airflow di-
rection.
12
LEFT/RIGHT AIRFLOW Button (OP-
TIONAL)
Used to set the desired left/right(horizon-
tal) airflow direction.
13
TIMER AND TIME SETTING Button
Used to set the time of starting or stop-
ping and sleeping operation.
14
ROOM TEMPERATURE CHECKING But-
ton
Used to check the room temperature.
15
°C/°F SWITCH Button
Used to switch temperature reading from
Celsius to Fahrenheit.
)
16
RESET Button
Used to reset the remote controller.
PRODUCT INTRODUCTION
9