Changing The Cdi Scale - Garmin GPSMAP 696 Owner's Manual

The course deviation scale setting is adjustable for Auto, ±0.25, 1.25 or 5.0 (nautical
mile, statute mile, or kilometer) full-scale deflection. The course deviation scale appears
on the lower right corner of the HSI. The default setting is Auto, which uses three
factors to determine the distance from the center of the CDI to full left or right limits:
• CDI scale = 1.25 - within 30 nm of any airport in the active route.
• CDI scale = 0.25 - on an approach leg or within 2 nm of the FAF or MAP.
• CDI scale = 5.0 - if the previous two conditions do not exist.
Displaying the panel on the map page:
From the Map Page press the PANEL Softkey.
Or:
1) From the Map Page press the MENU Key to display the Map Page Menu.
2) Turn or move the FMS Joystick to highlight 'Select Page Layout' and press
the ENT Key.
3) Turn or move the FMS Joystick to highlight 'Map with Panel' and press the
ENT Key.

CHANGING THE CDI SCALE

The CDI scale can be set from the Map Page Menu.
Changing the CDI scale:
1) From the Map Page with the Panel, HSI, or Compass Arc displayed, press
the MENU Key to display the Map Page Menu
2) Turn or move the FMS Joystick to highlight 'Set CDI Scale', and press the
ENT Key. The 'Set CDI Scale' Menu appears.
3) Turn or move the FMS Joystick to highlight the desired menu option, and
press the ENT Key.
190-00919-00 Rev. G
Map Page Menu
Garmin GPSMAP 695/696 Owner's Manual
GPS Navigation
Set CDI Scale Menu
41