Hsi/Panel; Changing The Cdi Scale; Setting The Bug Indicator; Manually Setting A Course - Garmin aera 510 Quick Reference Manual

GPS Navigation

2.2 hSi/PaNel

chaNGiNG the cdi Scale

The CDI scale can be set by touching the In or Out Icons from the HSI/Panel Screen
(if the CDI scale is NOT set to 'Automatic') or from the HSI/Panel option menu.
Changing the CDI scale:
1) From the 'Home' Screen, touch HSI/Panel > Menu > Set CDI Scale.
2) Touch the desired CDI Scale (' Automatic', ' 0.25 nm', ' 1.25 nm', or
'5.00 nm').

SettiNG the BUG iNdicatOr

The Bug Indicator can be set from the HSI/Panel option menu.
Setting the Bug Indicator:
1) From the 'Home' Screen, touch HSI/Panel > Menu > Set Bug
Indicator.
2) Touch the desired menu option ('User Selected', 'Bearing', 'Course to
Steer', or 'Off').

MaNUally SettiNG a cOUrSe

Use the 'Set OBS and Hold' menu option to manually set your course to the
destination.
Manually setting a course to the destination waypoint:
1) From the 'Home' Screen, touch the HSI/Panel or the Active FPl Icon.
2) Touch the Menu Icon
3) Touch the ' Set OBS and Hold' menu option (only available when
navigating a Direct To or Flight Plan).
4) Touch the '+' or '-' Buttons to increase/decrease the value
Or:
14
Garmin aera 500 Series Quick Reference Guide 190-01117-03 Rev. A