Epson WorkForce WF-2510WF User Manual page 84

User's Guide
Menu
Fax Settings
Menu List of Control Panel
Setting item Description
Send Settings Quality: Select this option to change the quality for fax data you are
sending.
Contrast: Select this option to change the contrast for fax data you are
sending.
Last Transmission Report: Indicates whether or when the product prints
a report for outgoing faxes. Select Off to turn off report printing, select On
Error to print reports only when an error occurs, or select On Send to print
reports for every fax you send.
Receive Settings
Auto Answer: &
Paper Size: Indicates the size of paper used for printing received faxes and
fax reports.
Auto Reduction: Indicates whether large received faxes are reduced in
size to fit on A4-size, or printed at their original size on multiple sheets.
Communication DRD: Indicates the type of answer ring pattern you want to use to receive
faxes. To select an option other than All (or Off), you must set up your
phone system to use different ring patterns. This option may be On or Off
depending on the region.
ECM: Indicates whether or not to use Error Correction Mode to
automatically correct fax data sent/received with errors due to the line or
any other problems. Color faxes cannot be sent/received when ECM is off.
Fax Speed: Indicates the speed at which you transmit and receive faxes.
Rings to Answer: Indicates the number of rings that must occur before
the product automatically receives a fax. Depending on the region, this
setting may not be displayed.
Dial Tone Detection: When this is set to On, the product starts dialing
after it detects a dial tone. It may not be able to detect a dial tone when a
PBX (Private Branch Exchange) or a TA (Terminal Adapter) is connected. In
that case, set to Off. However, doing so may drop the first digit of a fax
number and send the fax to the wrong number.
Dial Mode: Indicates the type of phone system to which you have
connected the product. Depending on the region, this setting may not be
displayed.
Header: &
Check Fax Checks the status of your fax connection.
Connection
"Setting up to receive faxes automatically" on page
"Creating header information" on page
84
75.
70.