Creating Header Information - Epson WorkForce WF-2510WF User Manual

User's Guide
G
Select a speed dial entry that you want to register in the group dial list. Use u or d to select the entry and do the
following to add it to the group.
Color 2.5-inch display models:
Press r. When you want to cancel the selection, press r again.
Monochrome 2-line display models:
Press . When you want to cancel the selection, press
H
Repeat step 7 to add other speed dial entries to the group dial list. You can register up to 30 speed dial entries in a
group dial.
I
Press OK to finish creating a group dial list.

Creating header information

You can create a fax header by adding information such as your phone number or name.
Note:
Make sure you have set the time correctly.
"Setting/Changing Time and Region" on page 108
&
A
Press K to enter the fax mode.
B
Press x to display the menus.
C
Select the menu shown below. Use u or d to select a menu, and press OK.
Color 2.5-inch display models:
Select Fax Settings > Communication > Header > Fax Header.
Monochrome 2-line display models:
Select Fax Settings > Header > Fax Header.
D
Enter the header information. You can enter up to 40 characters.
Color 2.5-inch display models:
Select Done and press OK to register the name.
Monochrome 2-line display models:
Press OK to register the name.
E
Press d to select Your Phone Number and press OK.
Faxing
again.
70