Canon Studio Solution User Manual page 52

4. Notice the Server Name, IP Address, and Workgroup. When setting up a client,
you will need to confirm these identifiers to ensure you are connected to the
correct server.
5. You will need to enable file sharing in Windows so that the client stations can
access the photos and data on this computer. Select Enable File Sharing.
a. For Windows XP: Follow the Network Setup Wizard to enable file sharing on
your network. You will need to restart your computer before this takes
effect.
b. For Windows Vista: The Network and Sharing Center window appears. Turn
On the following options: Network discovery, File sharing, Public folder
sharing, and Printer sharing. Select X to exit this window when finished.
c. You may also want to disable User Account Control (UAC) in Vista to
eliminate recurring password and permission prompts. To do this:
i. Open the Control Panel and under User Account and Family
Safety, select Add or remove user accounts.
ii. Select Go to the main User Accounts page and select Change
security settings.
iii. Click to unselect the box next to Use UAC to help protect your
computer.
iv. Select OK. UAC is now disabled.
6. You will need to share the photo folder in Windows so that the client stations can
access the photos on this computer. Select Share Photo Folder.
52
Setting Up: Your Network