Table of Contents
Advertisement
USB Mass Storage Reset Delay [20 Sec]
Sets the maximum time that the BIOS waits for the USB storage device to initialize.
Configuration options: [10 Sec] [20 Sec] [30 Sec] [40 Sec]
Emulation Type [Auto]
Allows you to set the emulation type. Configuration options: [Auto] [Floppy]
[Forced FDD] [Hard Disk] [CDROM]
3.7
Power menu
The Power menu items allow you to change the settings for the Advanced Power
Management (APM). Select an item then press <Enter> to display the configuration options.
Main
Ai Tweaker
Power Settings
Suspend Mode
ACPI 2.0 Support
ACPI APIC Support
APM Configuration
HW Monitor Configuration
Anti Surge Support
NB Thermal Protect
v02.61 (C)Copyright 1985-2011, American Megatrends, Inc.
3.7.1
Suspend Mode [Auto]
Allows you to select the Advanced Configuration and Power Interface (ACPI) state to be used
for system suspend.
[Auto]
[S1 (POS) only] Sets the ACPI suspend mode to S1/POS (Power On Suspend).
[S3 only]
3.7.2
ACPI 2.0 Support [Enabled]
[Disabled]
[Enabled]
3.7.3
ACPI APIC Support [Enabled]
[Disabled]
[Enabled]
3-28
M5A88-M BIOS Setup
Advanced
[Auto]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
The system automatically configures the ACPI suspend mode.
Sets the ACPI suspend mode to S3/STR (Suspend To RAM).
The system will not add additional tables as per ACPI 2.0 specifications.
The system adds additional tables as per ACPI 2.0 specifications.
The system disables the Advanced Configuration and Power Interface
(ACPI) support in the Advanced Programmable Interrupt Controller (APIC).
The ACPI APIC table pointer is included in the RSDT pointer list.
Power
Boot
Tools
←→
↑↓
Enter Go to Sub Screen
F1
F10
ESC
Version 0303
Exit
Select the ACPI state
used for System
Suspend.
Select Screen
Select Item
General Help
Save and Exit
Exit
Chapter 3: BIOS setup
Hide quick links:
Advertisement
Table of Contents
