Hw Monitor Configuration - Asus M5A88-M User Manual

3.7.5

HW Monitor Configuration

Hardware Monitor
CPU Temperature
MB Temperature
CPU Fan Speed
Chassis Fan Speed
VCORE Voltage
3.3V Voltage
5V Voltage
12V Voltage
CPU Q-Fan Function
CPU Fan Speed Low Limit
CPU Q-Fan Mode
v02.61 (C)Copyright 1985-2011, American Megatrends, Inc.
CPU Temperature / MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the CPU and motherboard
temperatures. Select Ignored if you do not wish to display the detected temperatures.
CPU Fan Speed [xxxxRPM] or [Ignored] / [N/A]
Chassis Fan Speed [xxxxRPM] or [Ignored] / [N/A]
The onboard hardware monitor automatically detects and displays the CPU and chassis fan
speed in rotations per minute (RPM). If the fan is not connected to the motherboard, the field
shows N/A. Select Ignored if you do not wish to display the detected speed.
VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators. Select Ignored if you do not want to detect this item.
CPU Q-Fan Function [Enabled]
[Disabled]
[Enabled]
The following item appears only when you set CPU Q-Fan Function to [Enabled].
CPU Fan Speed Low Limit [200]
This item appears only when you enable the CPU Q-Fan Control feature and allows you to
disable or set the CPU fan warning speed. Configuration options: [200 RPM] [300 RPM] [400
RPM] [500 RPM] [600 RPM] [Ignored]
3-30
M5A88-M BIOS Setup
[35ºC/95ºF]
[34ºC/93ºF]
[3590RPM]
[N/A]
[ 1.040V]
[ 3.008V]
[ 4.776V]
[11.648V]
[Disabled]
[200 RPM]
[Standard]
Disables the CPU Q-Fan feature.
Enables the CPU Q-Fan feature.
Power
CPU Temperature
←→
↑↓
Enter Go to Sub Screen
F1
F10
ESC
Version 0303
Select Screen
Select Item
General Help
Save and Exit
Exit
Chapter 3: BIOS setup