DX-L40-10A_09-0537_MAN_ENG_V1.book Page 1 Tuesday, July 28, 2009 10:07 AM It makes a difference how and where you use As you enjoy your new product, keep these The issue The home theater entertainment experience is a growing trend, and larger TVs are popular purchases.
DX-L40-10A_09-0537_MAN_ENG_V1.book Page 2 Tuesday, July 28, 2009 10:07 AM DX-L40-10A Important safety instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your TV. This label is located on the back of your TV.
Occasionally, a few non-active pixels may appear on the screen as a fixed blue, green, or red point. These non-active pixels do not adversely affect the performance of your TV, and are not considered defects. DX-L40-10A...
DX-L40-10A_09-0537_MAN_ENG_V1.book Page 4 Tuesday, July 28, 2009 10:07 AM DX-L40-10A Installing and removing the stand You must install your TV into the stand for it to stand upright on a cabinet or other flat surface. If you intend to mount your TV on a wall or other vertical surface, you must remove the stand column.
Cables are often color-coded to jacks connectors. For more information, see “Connecting a component video device” on page 11. AUDIO OUT jacks Connect audio cables (L and R) from these (L and R) jacks to an external audio amplifier or receiver. DX-L40-10A L R...
DX-L40-10A_09-0537_MAN_ENG_V1.book Page 6 Tuesday, July 28, 2009 10:07 AM DX-L40-10A Side connections Component Description ANT/CABLE IN Connect an antenna, cable TV, or a satellite jack box to this jack. For more information, see “Connecting an antenna, cable TV, or satellite TV box” on page 9.
Notes: Do not mix different types of batteries. Do not mix old and new batteries. DX-L40-10A Remove batteries when they no longer have a charge. Chemicals may leak into the battery compartment. Battery chemicals can cause a rash. If chemicals leak, clean the battery compartment with a cloth.
You will use the numbered code to program your remote control to work with your TV. Dynex TV codes for universal remote controls (for all Dynex TVs manufactured after Jan. 1, 2007) Universal remote control manufacturer and model Philips One for All...
HDMI3 3 Connect the other end of the AV cable to the AV2 VIDEO and L and R audio jacks on the back of your TV. DX-L40-10A Side of TV Note: Cables are often color-coded to connectors. Connect yellow to yellow, red to red, and white to white.
DX-L40-10A_09-0537_MAN_ENG_V1.book Page 10 Tuesday, July 28, 2009 10:07 AM DX-L40-10A To play from the VCR: 1 Turn on your TV, then press INPUT. The INPUT SOURCE menu opens. 2 Press to select AV2, then press ENTER. 3 Turn on the VCR, insert a videotape, then press PLAY on the VCR.
SOURCE menu opens. 2 Press ENTER. 3 Turn on the S-video device and set it to the correct output mode. See the S-video device’s user guide for more information. DX-L40-10A Side of TV S-video cable Audio cable VIDEO R S-VIDEO...
DX-L40-10A_09-0537_MAN_ENG_V1.book Page 12 Tuesday, July 28, 2009 10:07 AM DX-L40-10A Connecting a computer Tip: Some computers have an HDMI connector, which can be used for a better picture. To connect a computer: 1 Make sure that your TV’s power cord is unplugged and the computer is turned off.
3 Press ENTER. The setup wizard starts with the Language screen. 4 Press to select the language you want, then press ENTER. The Tuner screen opens. DX-L40-10A 5 Press to select Antenna or Cable, then press ENTER. The Channel Scan screen opens. 6 Press to select Scan, then press ENTER.
DX-L40-10A_09-0537_MAN_ENG_V1.book Page 14 Tuesday, July 28, 2009 10:07 AM DX-L40-10A You can choose from TV, AV1, AV2, S-video, Component 1, Component 2, VGA, HDMI1, HDMI2, or HDMI3. On-screen menu overview Use the on-screen menu to configure the various operational settings of your TV. To access the menu, press MENU.
For example, 5.1 indicates sub-channel 1 of main channel 5. DX-L40-10A Adjusting the volume To adjust the volume: • Press VOL+ or VOL– to increase or decrease the volume.
DX-L40-10A_09-0537_MAN_ENG_V1.book Page 16 Tuesday, July 28, 2009 10:07 AM DX-L40-10A • Contrast–Lets you increase or decrease the contrast of the picture. Increase the contrast to adjust the white areas of the picture or decrease the contrast to adjust the black areas of the picture.
For example, if you choose to block the MPAA rating R, the higher ratings, NC-17 and X, are automatically blocked too. DX-L40-10A The following ratings can be selected: U.S. TV ratings (age-based) These ratings are determined by the Federal...
DX-L40-10A_09-0537_MAN_ENG_V1.book Page 18 Tuesday, July 28, 2009 10:07 AM DX-L40-10A Adjusting the setup To adjust the setup: 1 Press MENU. The Main menu opens. 2 Press to highlight Setup, then press ENTER or . The Setup menu opens. 3 Press to highlight an option, then press to adjust or set the option.
If the problem is not solved by using these troubleshooting instructions, turn off your TV, then turn it on again. Contact us by logging on to www.dynexproducts.com or by calling DYNEX Customer Service at (800) 304-2204 (USA and Canada only). Maintenance...
Page 23
DX-L40-10A_09-0537_MAN_ENG_V1.book Page 20 Tuesday, July 28, 2009 10:07 AM DX-L40-10A FCC warning Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user’s authority to operate this equipment. Canada ICES-003 statement This Class B digital apparatus complies with Canadian ICES-003.
One-year limited warranty Dynex Products (“Dynex”) warrants to you, the original purchaser of this new DX-L40-10A (“Product”), that the Product shall be free of defects in the original manufacture of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”).
Page 25
DX-L40-10A_09-0537_MAN_ENG_V1.book Page 22 Tuesday, July 28, 2009 10:07 AM DX-L40-10A Legal notices...
Page 26
DX-L40-10A_09-0537_MAN_ENG_V1.book Page 23 Tuesday, July 28, 2009 10:07 AM Legal notices DX-L40-10A...
Page 27
DX-L40-10A_09-0537_MAN_ENG_V1.book Page 24 Tuesday, July 28, 2009 10:07 AM DX-L40-10A Legal notices...