Connecting A Component Video Device; Connecting An S-Video Device - Dynex DX-L40-10A User Manual

DX-L40-10A_09-0537_MAN_ENG_V1.book Page 11 Tuesday, July 28, 2009 10:07 AM
Making connections

Connecting a component video device

A component (Y, Pb, Pr) picture can be displayed
only when a 480i, 480P, 720P, or 1080i signal is
received.
To connect a component video device:
1 Make sure that your TV's power cord is
unplugged and the component video device is
turned off.
2 Connect a component video cable to the
COMPONENT OUT jacks on the component
video device.
VGA
HDMI3 HDMI2 AUDIO IN
AUDIO OUT
AV2
L R
VIDEO L
L
Y P P
B
R
COMP1
Component video cable
3 Connect the other end of the component video
cable to the COMP1 or COMP2 jacks on the
back of your TV.
4 Connect an audio cable to the AUDIO OUT
jacks (L/R) on the component device.
5 Connect the other end of the audio cable to the
COMP1 or COMP2 audio jacks on the back of
your TV.
To play from a component device:
1 Turn on your TV, then press INPUT. The INPUT
SOURCE menu opens.
2 Press
or to select COMP1 or COMP2, then
press ENTER.
3 Turn on the component video device and set it
to the correct output mode. See the component
video device's user guide for more information.
VGA
Back of TV
R
L R
L R
R
COMP2
Note: Cables are often
color-coded to connectors.
Y = Green cable
Pb = Blue cable
Pr = Red cable
Component video devices

Connecting an S-video device

To connect an S-video device:
1 Make sure that your TV's power cord is
unplugged and the S-Video device is turned off.
2 Connect an S-Video cable to the S-VIDEO OUT
jacks on the S-Video device.
Side of TV
S-video cable
Audio cable
3 Connect the other end of the S-video cable to
the S-VIDEO jack on the side of your TV.
4 Connect an audio cable to the AUDIO OUT
jacks (L/R) on the component device.
5 Connect the other end of the audio cable to the
AV1 audio jacks on the back of your TV.
To play from a component device:
1 Turn on your TV, then press INPUT. The INPUT
SOURCE menu opens.
2 Press
or to select S-VIDEO, then press
ENTER.
3 Turn on the S-video device and set it to the
correct output mode. See the S-video device's
user guide for more information.
11
DX-L40-10A
VIDEO
L
R S-VIDEO
S-video device