Appendix C - Faqs - Dell Latitude E6430 ATG How-To Manual

Re-image “how-to” guide latitude e-family & mobile precision
Hide thumbs Also See for Latitude E6430 ATG:
Table of Contents

Advertisement

Dell Latitude E-Family & Mobile Precision Reimage "How-To" Guide
1. How do I resolve a PCI Yellow Bang?
a. After installing the drivers and you have this PCI yellow bang in device manager, you need to
install the following drivers found in the Chipset folder:
b. For E-Family 1
c. For E-Family 2
2. How do I resolve a Broadcom USH Yellow Bang?
a. After installing the drivers and you have this USH yellow bang in device manager, you need
to install the Control Point Security Device Driver Pack
3. How do I resolve this Unknown Device yellow bang on E-Family 2
a. After installing the drivers and you have an unknown device yellow bang in device manager,
you need to install the ST Micro Freefall Sensor driver found under Chipset
4. What drivers are in the Control Point Security Device Driver pack?
a. The driver pack has the drivers for all security related hardware, including:
1. Broadcom Trusted Platform Module
2. Atmel Trusted Platform Module
3. STMicroelectronics Trusted Platform Module
4. Winbond Trusted Platform Module
5. O2Micro Smart Card Reader
6. Dell Smart Card Keyboard
7. UPEK TouchChip Fingerprint Reader
8. Authentec Fingerprint Reader
9. Broadcom Unified Security Hub
10. Vista Storage Driver Update (for ATAPI.SYS)
5. Can I use WiMax and WiFi at the same time?
a. No, the wireless adapter only supports one of them being active at one time
6. What is the Dell System Software utility and why do I need it?
Appendix C
General Re-Imaging FAQs
st
generation you need to install two drivers - AMT SOL / LMS and AMT HECI
nd
generation you need to install one driver - AMT HECI
nd
generation?

Advertisement

Table of Contents
loading

Table of Contents