Troubleshooting; The Machine Will Not Start; Overheating Cut-Off; Drying Takes Too Long - Asko T744 Operating Instructions Manual

Troubleshooting

The machine will not start

Check
• that the door is properly closed.
• that the main power switch is on.
• that any plug is connected.
• that the house fuses have not been tripped.
• that the overheating cut-out has not been
triggered.

Overheating cut-off

The overheating cut-off shuts off the tumble dryer
if the temperature is too high, caused by lint
clogging the lint filter, for instance.
• Clean the lint filter.
• The overheating cut-off will reset automatically
once the machine has cooled down.
14

Drying takes too long

• Check that the lint filter is not blocked. See the
"Care and maintenance instructions" chapter.

Error messages

L1 flashes
The maximum program time has been reached.
Read "Drying takes too long" in this chapter to
find out what to do.
L1
L2 Start
L3
Customer Care Center
1-800-898-1879
www.askousa.com
Stop