Air Exhaust - Asko T744 Operating Instructions Manual

Installation instructions
Install in a closet
ASKO's front panel controls make it possible to
install the washers and dryers in a closet. Make
sure there is a ½" (12mm) minimum clearance
between units and cabinet or wall. To ensure
proper ventilation, we recommend louvered doors,
particularly for condenser dryers. Otherwise there
must be ventilation openings in the door. See
illustration for minimum ventilation openings:

Air exhaust

Connecting the exhaust duct to the dryer
NOTE!
You will need to purchase a UL-CSA-approved
4" ridged metal exhaust duct. The dryer is
delivered with the stub pipe attached to the rear
exhaust outlet, though the exhaust duct can be
attached to either the left or the right exhaust
outlet.
Asko dryers have a "T-style"
Asko dryers have a
exhaust vent that allows you to
"T-stile" exhaust vent that
connect the duct on the rear,
allows you to connect the
on the left or on the right side
duct on the rear or on the
left or right side
.
Side Exhaust Outlet
Side Exhaust
Outlet
The duct must not be assembled with screws or
other fasteners that extend into the duct and
catch lint.
Customer Care Center
1-800-898-1879
www.askousa.com
Vent
Vent
T-tube
T-tube
Rear Exhaust Rear Exhaust Outlet
Outlet
Stub Stub Duct
Clamp Duct
Clamp
(not supplied)
(not supplied)
21