Gateway ID58 Reference Manual page 91

www.gateway.com
3 Click Yes, then click Start. A dialog box displays
information about the hard drive that the
operating system will be recovered to.
Caution
Continuing the process will erase all files on your hard
drive.
4 Click OK. The recovery process begins by
restarting your computer, then continues by
copying files to your hard drive. This process may
take a while, but a
Management
When the recovery has finished, a dialog box
prompts you to restart your computer.
5 Click OK. Your computer restarts.
6 Follow the on-screen prompts for first-time
system setup.
Recovering from the hard drive during startup
To reinstall Windows Vista and all pre-installed
software and drivers:
1 Turn on your computer, then press A
during startup.
opens.
2 Click Completely Restore System to Factory
Defaults.
Caution
Continuing the process will erase all files on your hard
drive.
3 Click Next to continue. Your hard drive's original,
factory-loaded contents are recovered. This
process will take several minutes.
Gateway Recovery
screen shows you its progress.
Gateway Recovery Management
+F10
LT
85