Using A Memory Card; Removing A Memory Card; Installing A Printer Or Other Peripheral Device - Gateway ID58 Reference Manual

Using a memory card

To access a file on a memory card:
1
2

Removing a memory card

remove the memory card. If you use the remove hardware icon, your
notebook may not recognize your memory card reader until you
restart your notebook.
To remove a memory card:
1
2
Installing a printer or other
peripheral device
Your notebook has one or more of the following ports:
Universal Serial Bus (USB) and HDMI (digital
audio/video). You use these ports to connect
peripheral devices such as printers, scanners, and
digital cameras to your notebook.
device, see the device documentation and installation instructions.
USB ports support
which means that your notebook will usually
recognize such a device whenever you plug it into the
appropriate port. When you use a USB device for the
first time, your notebook will prompt you to install any
software the device needs. After doing this, you can
disconnect and reconnect the device at any time.
Start, then click Help and Support. Type the keyword installing
devices in the Search Help box, then press E
48
CHAPTER 4: Using Drives and Accessories
Click (Start), then click Computer.
Double-click the drive letter (for example, the E:
drive), then double-click the file name.
Important
Do not use the remove hardware
Push the memory card into the notebook. The
memory card pops out slightly.
Pull the memory card out of the notebook.
Important
Before you install a printer, scanner, or other peripheral
plug-and-play
Help
For more information about installing peripheral devices, click
icon in the taskbar to
hot swapping
and
.
NTER
,