Remote Control Mode Setup; Flicker Reduction Setup - Pioneer VSX 1019AH-K - AV Receiver - Gloss Operating Instructions Manual

The system and the other setup

Remote Control Mode Setup

• Default setting: 1
This sets this receiver's remote control mode to
prevent erroneous operation when multiple
units of the receiver are being used.
1 Select 'Remote Control Mode Setup'
from the Other Setup menu.
4d.Other Setup
A/V RECEIVER
1. KURO LINK Setup
2. Multi Ch In Setup
3. ZONE Audio Setup
4. Power ON Level Setup
5. Volume Limit Setup
6. Remote Control Mode Setup

7. Flicker Reduction Setup

4d6.Remote Control Mode Setup
Remote Control Mode :
Exit
Exit
2 Select the Remote Control Mode setting
you want.
3 Select "OK" to change the remote control
mode.
4 Follow the instructions on the screen to
change the remote control's setting.
See Operating multiple receivers on page 73.
5 When you're finished, press RETURN.
You will return to the Other Setup menu.
Note
1 If you change this receiver's setting, also change the setting on the remote control.
1
A/V RECEIVER
1
Return
OK
Cancel
Flicker Reduction Setup
• Default setting: 4
The GUI screen's resolution can be increased.
If you feel the GUI screen is hard to see, try
changing this setting. Note that the resolution
in this setting only affects the GUI screen; it
has no influence on the video output.
1 Select 'Flicker Reduction Setup' from the
Other Setup menu.
4d.Other Setup
A/V RECEIVER
1. KURO LINK Setup
2. Multi Ch In Setup
3. ZONE Audio Setup
4. Power ON Level Setup
5. Volume Limit Setup
6. Remote Control Mode Setup
7. Flicker Reduction Setup
4d7.Flicker Reduction Setup
Flicker Reduction :
Exit
Exit
2 Select the Flicker Reduction setting you
want.
3 When you're finished, press RETURN.
You will return to the Other Setup menu.
A/V RECEIVER
4
Return
Finish
11
101
En