Scsi Id Setting (Mp Model Only) - Fujitsu MAN3184MC - Enterprise 18.4 GB Hard Drive Product/Maintenance Manual

2 4 6 8 10
1 3 5 7 9
Figure 5.3
5.3.1

SCSI ID setting (MP model only)

Table 5.1 shows the SCSI ID setting. Refer to Figures 5.2 and 5.3 for terminal positioning and
allocation.
When the SCSI ID is set using the external operator panel connector
CN1, all pins listed in Table 5.1 should be open. If any of pins are
shorted, unexpected SCSI ID is set.
5 - 6
12 14 16 18 20 22
11 13 15 17 19 21
Setting terminals (CN2 on MP model only)
IMPORTANT
C141-E128-01EN
24
23
Terminal power supply: Supply
(LED signal)
(IDD Reset signal)
N.C.
Force Single Ended: LVD mode
Force Narrow: 16bit-SCSI
Spin-up mode
Write protect: enabled
SCSI ID #15