Viewing A Route; Editing A Route; Inserting A Leg - Magellan Meridian Platinum User Manual

Reference
(Note: If the route is active, the Meridian will automatically display
"Deactivate Route" in the menu and inversely if the route is not active,
"Activate Route" will be displayed.)
Viewing a Route — Allows you to view the legs of a route using the same
screen that was used to create the route. Viewing a route can be used if
you just wanted to see the components of the route or as a precursor to
editing the route.
From
Any
Screen
Editing a Route — Enables you to modify an existing route by inserting a
leg, deleting a leg or replacing a leg. Follow the instructions above for
Viewing a Route and then use the instructions for inserting, deleting,
replacing or appending a leg as appropriate.
When you are done with editing the route, use the Up/Down arrows to
highlight the "Save Route" button and press ENTER.
Inserting a Leg — Inserts a waypoint in the middle of an existing leg
thereby making two legs where there used to be one.
Select route to be edited.
In the example of a route that goes from "A" to "B" to "C" to "D", if
you wanted to insert the waypoint "E" between "B" and "C" you would
highlight the waypoint "C" and follow the steps to insert waypoint "E".
Your route would then be "A" to "B" to "E" to "C" to "D".
54
Highlight
MENU
Routes
Highlight
View/Edit Route
See Instructions for

Viewing a Route

Highlight
Insert
Select
ENTER
Waypoint
ENTER
ENTER
Highlight destination
waypoint for leg that will
have a leg inserted.
Select
ENTER
ENTER
Database
Select
MENU
Route
MENU
Magellan Meridian GPS Receiver