Accessories - Chamberlain LA400 Owner's Manual

ACCESSORIES

50-19503
Push-to-Open Bracket
Used to allow the gate operator to push the gate open.
02101 1-Button Station:
Steel enclosure wired station will allow for a Open,
Close, Stop command of the gate.
3-Button Mini-Remote Control with
370LM
SECURITY✚
With key ring and fastening strip.
373LM
3-Button SECURITY✚
Includes visor clip.
Remote Antenna Mounting Kit:
86LM
Kit contains antenna bracket and 15 feet (4.6 m) of
cable. Recommended for increasing the effective range
of remote controls.
377LM
SECURITY✚
Enables homeowner to operate gate by entering a
password on a specially designed keypad.
®
:
®
Remote Control
®
Keyless Entry :
To order visit www.liftmaster.com
LM202
GC824-12
MG1300
:
29-NP712
CPS-LN4
46
Vehicle Exit Sensor:
One piece outdoor buried vehicle motion detector with
sensing probe is housed in a small relay type housing
so it is easy to integrate with gate, providing for free
exit only.
Gate Solenoid Lock:
Heavy all steel construction. Fail safe operation keeps
gate locked if power is lost. Can be welded onto gate or
post. 12 Vdc operation, solenoid-activated release. Can
be released in case of an emergency. Requires separate
power supply (Model ARMP5).
Magnetic Gate Lock:
Outdoor magnetic lock, transformer, junction box,
mounting plate and hardware.
7 AH/12 Vdc Gate Access System Battery:
The gate access system battery is a replacement battery
for the operator. The model LA400 requires two
batteries.
Commercial Protector System
(Direct Connect):
Maximum range is 45 feet (13.7 m) 24 V. Includes
mounting hardware.
®