Table of Contents
Advertisement
Miscellaneous
Brightness
Brightness—Adjust the brightness settings to obtain the best image. The
Brother TWAIN Scanner driver offers 100 brightness settings (-50 to 50).
The default value is 0, representing an "average" setting.
You can set the brightness level by dragging the slidebar to the right to
lighten the image or to the left to darken the image. You can also type a
value in the box to set the setting. Click OK.
If the scanned image is too light, set a lower brightness value and scan the
document again.
If the image is too dark, set a higher brightness value and scan the
document again.
Contrast
The contrast setting is adjustable only when you have selected one of the
gray scale settings, but it is not available when Black & White is selected
as the Gray Scale.
Increasing the contrast level (by dragging the slidebar to the right)
emphasizes dark and light areas of the Image, while decreasing the
contrast level (by dragging the slidebar to the left) ravels more detail in
gray areas. Instead of using the slidebar, you can type a value in the box to
set the contrast. Click OK.
9 - 6
U S I N G Y O U R B R O T H E R M A C H I N E W I T H Y O U R A P P L E M A C I N TO S H G 3 O R I M A C
Advertisement
Table of Contents
Troubleshooting
