Display; Connection; Blue Back; Osd Language - JVC SR-HD2500US Instructions Manual

DISPLAY

.
ON SCREEN GUIDE
For displaying operation details.
Setting Values
AUTO Appears for five seconds when an
operation is performed.
OFF Not displayed.

BLUE BACK

For setting the screen display when there is no signal input.
Setting Values
OFF Displays screen as it is.
ON Switches display to a blue screen.
SCREEN SAVER
For setting whether to use a screensaver.
Setting
Values
OFF Screen saver is not used.
ON Screen saver is used. Switches to the burn-
in prevention screen when the unit is not
operated for more than five minutes.

OSD LANGUAGE

For setting the language for messages displayed on-screen.
Description
Description
Description

CONNECTION

.
MONITOR TYPE
For setting the aspect ratio according to the connected
monitor.
Setting Values
16:9 Set to this value when connected to
monitors with 16:9 aspect ratio.
16:9FULL Choose this setting when a 16:9 monitor
is connected to display images without
the black borders.
4:3 PAN&SCAN Set to this value when connecting to
monitors with an aspect ratio of 4:3.
Plays back videos with the left and right
edges trimmed off.
4:3 Set to this value when connecting to
LETTERBOX monitors with an aspect ratio of 4:3.
Plays back videos with a black band at
the upper and lower ends.
HDMI CONNECTION
VIDEO PRIORITY MODE
Setting Values
SDI/ Set to this value for output at a
COMPONENT resolution of "480p" or higher from the
[COMPONENT VIDEO OUT] terminal,
or from the [SDI OUT] terminal.
HDMI Set to this value when priority is to be
given to the "HDMI OUTPUT
RESOLUTION" setting.
Memo:
During data output from the [HDMI] terminal, setting to
"SDI/COMPONENT" automatically outputs data in the
"COMPONENT OUTPUT" setting.
Setting to "HDMI" outputs data in the "HDMI OUTPUT
RESOLUTION" setting.
During data output from the [HDMI] and [COMPONENT
VIDEO OUT] terminals, setting to "SDI/COMPONENT"
automatically outputs data in the "COMPONENT OUTPUT"
setting.
Setting to "HDMI" outputs data at the "480i" resolution from
the [COMPONENT VIDEO OUT] terminal.
When the [SDI OUT] terminal and the [HDMI] terminal are
connected at the same time, setting to "SDI/COMPONENT"
outputs data from the [SDI OUT] terminal.
Settings Menu
Description
Description
83