Magnavox ZV420MW8 - DVDr/ VCR Combo Owner's Manual page 77

Video (cont'd)
1
Progressive Scan (Default : OFF)
This unit is compatible with the progressive scan system.
The feature provides you with the higher definition
images than the traditional output system does. To utilize
this feature, you must set progressive scan mode to "ON".
1) Use [K / L] to select "ON", then press [OK].
General Setting
Playback
Display
Video
Progressive Scan
Recording
ON
Clock
OFF
Reset All
2) Use [{ / B] to select "Yes", then press [OK].
General Setting
Playback
Activating progressive scan:
Display
Check your TV has progressive scan
Video
Progressive Scan
and connect with component video cable.
Recording
ON
Clock
OFF
Reset All
NOTE :
If there is no picture or picture is
distorted after selecting
Wait about 15 seconds for auto recovery.
Activate?
3) Use [K / L] to select "Yes" within 15 seconds, then
press [OK].
Your setting will be activated.
Note
• If your TV is compatible with progressive scan (525p /
480p), you are recommended to use the component
video cable (commercially available) to connect this
unit to the TV. (Refer to "Method 2" on page 15.) If
not, use the RCA video cable and set the progressive
scan to "OFF" or press and hold [SETUP] for more
than 3 seconds during DVD playback.
• When selecting "No" or not pressing any buttons on
the unit or remote control within 15 seconds at step 3,
progressive scan remains to be "OFF" (interlace scan).
SETUPS
Progressive Scan
TV Aspect
Video Input
Progressive Scan
TV Aspect
Select Video
"Yes",
Yes No
2
TV Aspect (Default: 4:3 Letter Box)
You can select the TV aspect ratio to match the formats of
what you are playing back with the unit and your TV
screen (4:3 standard or 16:9 widescreen TV).
Use [K / L] to select a setting, then press [OK].
General Setting
Playback
Display
Video
TV Aspect
Recording
4:3 Letter Box
Clock
4:3 Pan & Scan
Reset All
16:9 Wide
If you have a standard TV:
Select "4:3 Letter Box", so that black bars appear on the
top and bottom of the TV screen when playing back a
wide-screen picture. Select "4:3 Pan & Scan" for a full
height picture with both sides trimmed when playing
back wide-screen picture.
If you have a widescreen TV:
Select "16:9 Wide".
Progressive Scan
TV Aspect
Video Input
EN EN 77 77