Vcr Functions; Playback; Recording - Magnavox ZV420MW8 - DVDr/ VCR Combo Owner's Manual

Playback

1) Press [STANDBY-ON y] on the remote control or
the front panel of the unit.
When you are playing back a cassette tape, turn the TV
on and be sure to select the input to which the unit is
connected.
Press [VCR].
2) Insert a prerecorded cassette tape. Press [PLAY B]
to begin playback.
3) During playback, press [PAUSE F].
Playback will pause and sound will be muted.
4) Press [PLAY B] to resume playback.
5) Press [STOP C] to stop playback.
6) Press [STOP C / EJECT A] on the front panel of the
unit to eject the cassette tape.
Note
• When a cassette tape without erase-protection tab is
inserted, the unit will start playback automatically.
• Tracking will be automatically adjusted upon
playback. To adjust the tracking manually, press
[TRACKING / ].

VCR FUNCTIONS

Recording

Press [VCR] first.
Before recording, make sure:
• The appropriate external input position (E1/E2) to which
your external tuner is connected is selected by pressing
[SOURCE].
• There is a cassette tape with a erase-protection tab in
the unit.
• The desired recording mode is selected in SP (standard
playback) or SLP (super long playback) mode by
pressing [REC MODE].
Recording mode:
Tape speed Recording / playback time
Type of tape T60
SP mode 1hour
SLP mode 3hours
• Refer to pages 26-29 for instructions on timer recording.
1) Press [REC I] to begin the recording.
To temporarily stop recording or to resume it, press
[PAUSE F]. After the unit has been in pause mode for
5 minutes, it will stop automatically to protect the
cassette tape and the video head from damage.
2) Press [STOP C] when the recording is completed.
Accidental erasure prevention
To prevent accidental recording on a
recorded cassette tape, remove its erase-
protection tab. To record on it later, cover
the hole with cellophane tape.
T120 T160
2hours 2-2/3hours
6hours 8hours
erase-protection tab
EN 79