To video equipment without an i.LINK jack
When connecting the unit to a recorder without an
i.LINK jack, connect the two devices as follows.
Set [COMPONENT] and [DOWN CONVERT] of
[VIDEO OUT] in the [IN/OUT REC] menu (page 51)
depending on the signals you wish to output.
Recorder
Notes
• See also "Notes" on (page 30).
• The audio output signal is selected by the setting of
[AUDIO MIX] in the [AUDIO SET] menu.
Monitor
To audio input
To video input
To S-video input
To component video input
Audio cable (not supplied)
Video cable (not supplied)
S-video cable (not supplied)
Component video cable (not supplied)
HVR-M15A (rear panel)
: Signal flow
Chapter 3 Dubbing/Editing
43