Playback Functions - Sony HVR-M15AU - Professional Video Cassete recorder/player Operating Instructions Manual

Playback

Playback Functions

This section describes useful functions that can be used
during playback.
Displaying information (data codes)
recorded on a tape
If you record on a tape using a Sony digital HD video
camera recorder or digital camcorder, the recording
information (data codes) is recorded on the tape.
During playback, you can check the recording date and
time from the data codes by displaying this information
on the unit. Each time you press the DATA CODE
button on the Remote Commander, the display switches
between no data code display and recording date/time
display. Also, you can change the display by setting
[DATA CODE] in the [DISPLAY SET] menu.
For details, see "DATA CODE" on page 53.
No indicator
Recording
date/time
JAN 1 2008
Notes
• If data codes were not recorded, "- - -" appears instead.
• The unit cannot record or play back camera data.
32
Chapter 2 Playback and Recording
Date
Time
12:00:00
AM