Insignia Infocast NS-DP3CH User Manual page 49

Infocast™ Internet Media Display
To restore default settings:
1
2
3
4
Cleaning the Infocast™ Internet Media
Display
To clean your Infocast™ Internet Media
Display:
1
2
3
www.insigniaproducts.com/chumby
Turn off your Infocast™ Internet Media Display, then
press a finger to the screen while you press the power
button to turn it back on. The Special options menu
opens.
Tap Restore factory settings. A message asks if you
want to restore settings.
Tap OK to continue the process, or tap CANCEL to
stop it.
If you tapped OK, follow the on-screen prompts until
the process is complete. You'll have to complete the
initial setup again. See the Quick Setup Guide for
instructions.
Turn off and unplug your Infocast™ Internet Media
Display, then wipe the exterior plastic with a damp (not
dripping wet) cloth.
For extra thorough cleaning, wipe the exterior with a
cloth dampened with soapy water, then wipe it down
with a cloth dampened with clean water.
Caution
Make sure that no water or cleaning solution
drips into the case.
To clean the touchscreen, wipe it with a clean,
non-scratching cloth dampened with water or a mild
glass cleaner that contains no alcohol or ammonia.
49