IBM LS42 - BladeCenter - 7902 Installation And User Manual page 47

The following illustration shows how to remove a CFFh expansion card from the
blade server; removing a combination-form-factor expansion card from a MPE
unit is similar.
a. Locate the CFFh card in the blade-expansion connector (see "Blade server
connectors" on page 14).
b. Pull up the release lever on the CFFh card until the card disconnects from
the blade-expansion connector.
c. Pull the card toward the front of the blade server to remove it from the card
retainer brackets.
6. Remove the CFFv card:
The following illustration shows how to remove a CFFv expansion card from the
blade server; removing a combination-form-factor expansion card from a MPE
unit is similar.
a. Locate the CFFv card in the I/O-expansion card connector (see "Blade
server connectors" on page 14).
b. Pull up on the CFFv card to remove it from the expansion connector; then,
lift the card out of the blade server.
7. If you have other devices to install or remove, do so now; otherwise, go to
"Completing the installation" on page 46.
Chapter 3. Installing optional devices
37