2.1.
Detaching.the.arm/stand.(for.VESA.wall.
mount)
The detachable stand of this monitor is specially designed for VESA wall
mount.
1.
Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2.
Use your fingers to loosen the screw located at the bottom of the
base, and remove the base from the stand.
3.
Or you may directly use a screwdriver to remove the screws that
secure the stand to the monitor, and detach the stand from the
monitor.
•
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
•
Hold the stand while removing the screws.
1
2
•
The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
•
Use only the UL Listed Wall Mount Bracket with minimum weight/load 22.7kg
(Screw size: M4 x 10 mm).
ASUS LCD Monitor VN247 Series
3
2-1