Image - Asus VN247H User Manual

• In the User Mode, colors of R (Red), G (Green), and B (Blue) are user-
configurable; the adjusting range is from 0 ~ 100.

.3.. Image

You can adjust the image Sharpness, Trace Free(only for VN247H ),
Aspect Control, ASCR, Position (VGA only), and Focus (VGA only)
from this main function.
VN247
Splendid
Color
Image
Input Select
System Setup
•. Sharpness: Adjusts the picture sharpness. The adjusting range is from
0 to 100.
•. Trace.Free:.Speeds up the response time by Over Drive technology. The
adjusting range is from lower 0 to faster 100. (only for VN247H)
•. Aspect.Control: Adjusts the aspect ratio to "Full", "4:3","Overscan".
(Overscan is available only for VN247H HDMI source)
•. ASCR: Select ON or OFF to enable or disable dynamic contrast ratio
function.
•. Position: Adjusts the horizontal position (H-Position) and the vertical
position (V-Position) of the image. The adjusting range is from 0 to 100
(Only available for VGA input).
•. Focus: Reduces Horizonal-line noise and Vertical-line noise of the image
by adjusting (Phase) and (Clock) separately. The adjusting range is from
0 to 100 (Only available for VGA input).
• Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
• Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.
ASUS LCD Monitor VN247 Series
Sharpness
Trace Free
Aspect Control
ASCR
Position
Focus
Move Menu
40
60
Full
OFF
Exit
3-3