Table of Contents
Advertisement
NETGEAR RangeMax Wireless-N USB 2.0 Adapter WN111v2 User Manual
1. Use the
icon to open the Smart Wizard. The Settings tab displays:
Figure 2-8
2. Enter the network settings.
a. In the Network Type section, make sure that Access Point (Infrastructure) is selected.
b. In the Profile field, type a name for the profile.
c. In the Network Name (SSID) field, select a network or enter the SSID.
Note: You will not get a wireless network connection unless the network SSID
matches exactly the SSID used by the access point.
3. Click Save Profile.
All the configuration settings are saved in this profile.
4. To use the profile, click Apply.
5. Verify wireless connectivity to your network.
Use a browser to connect to the Internet, or check for file and printer access on your network.
You can check the status bar in the Smart Wizard for the current connection status.
Note: If you cannot connect, see
accessing network resources, the Windows client and file and print sharing
software might not be installed and configured correctly on your computers.See the
link to
"Internet Networking and TCP/IP Addressing:" in Appendix
2-10
Chapter 4,
"Troubleshooting". For problems with
v1.0, May 2008
B.
Advertisement
Table of Contents
