Table of Contents
Advertisement
NETGEAR RangeMax Wireless-N USB 2.0 Adapter WN111v2 User Manual
Using a WPS Push Button to Connect to a Wireless Access Point or Router
To join a network using a push button:
1. Use the
icon to open the Smart Wizard. On the status bar, click Join a Network. The
adapter detects a network with WPS:
Figure 2-4
2. Select Yes to use WPS, and then click Next.
3. Select Yes (to use a push button), and then click Next.
4. Log in to the access point or router that you have selected.
5. From the router's main menu, select Add WPS Client. On the Add WPS Client screen, select
Push Button.
6. To start the WPS process, either press the push button on the access point or router, or click the
icon on the Add WPS Client screen.
7. Within 2 minutes, return to the WN111v2 Smart Wizard screen, and click
The Smart Wizard initiates your wireless connection.
8. You can use the Status Bar to verify your network connection. For more information, see
"Smart Wizard Status Bar" on page
2-6
1-5. Click Close to exit the Smart Wizard.
v1.0, May 2008
.
Advertisement
Table of Contents
