Table of Contents
Advertisement
o [AUTO REVIEW]
•
If it is set to [HOLD] when the camera is set to [
playback screen display (P50) or enlargement by rotating the rear dial is possible during Auto
Review.
•
The Auto Review function is activated regardless of its setting when set to [H] for Burst Mode
(P64), for Auto Bracket (P66) and for still pictures with audio (P122). (Will not hold) Also, you
cannot set the Auto Review function.
•
If [HIGHLIGHT] (P124) is set to [ON], white saturated areas appear blinking in black and white
when the Auto Review function is activated.
•
[AUTO REVIEW] does not work during Burst Mode when set to [M] or [L] or during recording
motion pictures.
•
When [AUTO REGISTRATION] in [FACE RECOG.] (P104) is set to [ON], [AUTO REVIEW] can
only be set to [3SEC.] or [5SEC.].
x [USB MODE]
•
When [PC] is selected, the camera is connected via the "USB Mass Storage" communication
system.
•
When [PictBridge(PTP)] is selected, the camera is connected via the "PTP (Picture Transfer
Protocol)" communication system.
| [VIDEO OUT]
•
This will operate when the AV cable or HDMI mini cable (optional) is connected.
[TV ASPECT]
•
This will work when the AV cable is connected.
Set the length of time that the picture is displayed after taking it.
[OFF]/[1SEC.]/[3SEC.]/[5SEC.]
[HOLD]:
The pictures are displayed until shutter button is pressed halfway.
Select the USB communication system after or before connecting
the camera to your PC or your printer with the USB connection
cable (supplied).
y [SELECT ON CONNECTION]:
Select either [PC] or [PictBridge(PTP)] if you connected the
camera to a PC or a printer supporting PictBridge.
{ [PictBridge(PTP)]:
Set after or before connecting to a printer supporting PictBridge.
z [PC]:
Set after or before connecting to a PC.
Set to match the color television system in each country.
[NTSC]:
Video output is set to NTSC system.
[PAL]:
Video output is set to PAL system.
Set to match the type of TV.
[W]:
When connecting to a 16:9 screen TV.
[X]:
When connecting to a 4:3 screen TV.
] (P43) or [
] (P68), switching of the
Preparation
33
VQT2S62
Advertisement
Table of Contents
