Panasonic DMCG10K - DIGITAL CAMERA/LENS KIT Operating Instructions Manual page 170

Digital camera/lens kit
Table of Contents

Advertisement

Others
[NO ADDITIONAL SELECTIONS CAN BE MADE]
The number of pictures, which can be set at one time when [MULTI] has been selected for
[DELETE MULTI] (P53), [FAVORITE] (P134), [TITLE EDIT] (P135), [TEXT STAMP] (P136) or
[RESIZE] (P139) has been exceeded.
> Reduce the number of pictures set, and then repeat the operation.
More than 999 favorites have been set.
[CANNOT BE SET ON THIS PICTURE]
[TITLE EDIT], [TEXT STAMP] or [PRINT SET] cannot be set for pictures not based on the
DCF standard.
[MEMORY CARD ERROR
FORMAT THIS CARD?]
It is a format that cannot be used with this unit.
> Format the card again with the camera after saving necessary data on a PC etc. (P35)
[LENS NOT FOUND, OR "
[THE LENS IS NOT ATTACHED PROPERLY. DO NOT PUSH LENS RELEASE
BUTTON WHILE LENS IS ATTACHED.]/
[PLEASE CHECK THAT THE LENS IS ATTACHED CORRECTLY]
Do not press the lens release button while taking pictures.
When using a Leica lens mount adaptor (DMW-MA2M or DMW-MA3R; optional), set
[SHOOT W/O LENS] (P128) to [ON] in the custom menu.
Detach the lens once, and then attach it again without pressing the lens release button. (P18)
Turn on the power again, and if it is still displaying, contact the dealer.
[MEMORY CARD PARAMETER ERROR]/[THIS MEMORY CARD CANNOT BE USED]
> Use a card compatible with this unit. (P25)
SD Memory Card (8 MB to 2 GB)
SDHC Memory Card (4 GB to 32 GB)
SDXC Memory Card (48 GB to 64 GB)
[INSERT SD CARD AGAIN]/[TRY ANOTHER CARD]
An error has occurred accessing the card.
> Insert the card again.
> Insert a different card.
[READ ERROR/WRITE ERROR
PLEASE CHECK THE CARD]
It has failed to read or write data.
> Remove the card after turning the power [OFF]. Insert the card again, turn the power on,
and try to read or write the data again.
The card may be broken.
> Insert a different card.
[MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF THE
WRITING SPEED OF THE CARD]
Use a card with SD Speed Class
¢ SD speed class is the speed standard regarding continuous writing.
In the event that it stops even after using a "Class 6" card or higher, the data writing speed has
deteriorated so it is recommended to make a backup and then format (P35).
Depending on the type of the card, motion picture recording may stop in the middle.
170
VQT2S62
" SHOOT W/O LENS IS SET TO OFF.]/
¢
with "Class 6" or higher when recording motion pictures.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dmc-g10k

Table of Contents