Panasonic DMCG10K - DIGITAL CAMERA/LENS KIT Operating Instructions Manual page 127

Digital camera/lens kit
Table of Contents

Advertisement

[MF GUIDE]
Refer to P73 for details.
[PREVIEW HOLD]
[EXPO.METER]
Set to [ON] to display the [EXPO.METER] when correcting exposure,
performing program shift, setting aperture, and setting shutter speed.
Unsuitable areas of the range are displayed in red.
The Exposure Meter will only be displayed when the camera is set to
display information on the LCD monitor or viewfinder (P54)
The [EXPO.METER] disappears after approximately
4 seconds if no operation is performed.
[LVF DISP.STYLE]
Refer to P55 for details.
[LCD DISP.STYLE]
Refer to P54 for details.
[PLAY ON LCD]
Refer to P55 for details.
In Manual Focus, it is possible to check if the focus position is
near side or far side.
[OFF]
[ON]:
MF guide is displayed on the screen when the focus
ring is rotated.
This will set the operation of the [
preview screen.
[OFF]:
Preview screen is displayed only when the [
pressed.
It will return to previous screen when [
[ON]:
Preview screen is displayed even after the [
released after pressing. (P87)
It will return to previous screen when [
again.
Select whether or not to display the Exposure Meter when the mode dial is
³
±
´
switched to
/
/
/
[OFF]/[ON]
This will set the display style of the viewfinder.
[
]:
Viewfinder style
[
]:
LCD monitor style
This will set the display style of the LCD monitor.
[
]:
Viewfinder style
[
]:
LCD monitor style
It will switch automatically to LCD monitor during the playback
when the viewfinder was selected during the recording.
[OFF]/[ON]
] button when displaying the
²
etc.
Advanced (Recording pictures)
] is
] is released.
] is
] is pressed
VQT2S62
127

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dmc-g10k

Table of Contents