Table of Contents
Advertisement
Advanced (Recording pictures)
[¦
BUTTON SWITCH]
[DIAL GUIDE]
•
It will display dial operation guide to the screen that is possible to
perform Exposure Compensation, Program Shift, aperture setting, or
shutter speed setting when set to [ON].
A Dial operation guide
[MENU RESUME]
[PIXEL REFRESH]
•
Imaging device and image processing is optimized when the camera is purchased. Use this
function when bright spots not in subject get recorded, and it is bothering you.
•
Turn the camera off and on after the pixels are corrected.
[SENSOR CLEANING]
•
Dust reduction function will operate automatically when the camera is turned on, but you can
use this function when you see dust. (P166)
[SHOOT W/O LENS]
•
When using a Leica lens mount adaptor (DMW-MA2M, DMW-MA3R; optional), set it to [ON].
128
VQT2S62
It is possible to set how the [¦] button to toggle to Intelligent
Auto Mode will operate.
:
[SINGLE PRESS]
It will switch to Intelligent Auto Mode by pressing [¦].
[PRESS AND HOLD]
It will switch to Intelligent Auto Mode by pressing [¦] for a while.
Sets if the operation switch guide when the mode dial is switched
to
,
,
and
[OFF]/[ON]
The last operated menu position is saved even if the camera is
turned off.
[OFF]/[ON]
It will perform optimization of imaging device and image
processing.
Dust reduction to blow off the debris and dust that have affixed to
the front of the imaging device is performed.
It is possible to setup so the shutter will not operate when there is
no lens on the unit.
[OFF]:
You cannot press the shutter button when a lens is not
attached to the camera body or is not attached
correctly.
[ON]:
Shutter will operate regardless of the lens on the unit.
:
is to be displayed or not.
A
Advertisement
Table of Contents
