Adjust the [MINIATURE EFFECT] settings
Blurring above and below or to the left and right of the set range, it will look as though the
picture was of a miniature.
1
Select [MINIATURE EFFECT] using Step
2
Press 4 to display the setting screen.
•
A frame around the area not to be blurred will display.
3
Adjust the position and size of the frame and then press [MENU/SET] to set.
A When the frame is horizontal
3/4
Move (up and down)
2/1
Switch to B
Enlarge and shrink
•
•
If you press [DISPLAY], the adjusted frame will return to the original values.
C Non-blurrable range
Note
•
Display of the recording screen will be delayed more than usual and the screen will look as if
frames are being dropped.
•
No sound is recorded in motion pictures.
•
Approximately 1/10 of the time period is recorded. (If you record for 10 minutes, the resulting
motion picture recording will be approximately 1 minute long.)
The displayed available recording time is approximately 10 times. When switching to Recording
Mode, please check the available recording time.
•
When taking pictures of a large size, the screen may turn black after taking the picture because
of signal processing. This is not a malfunction.
You can switch between three levels.
Recording
2
on
P84
and then press [MENU/SET].
B When the frame is vertical
Switch to A
Move (left and right)
- 85 -