Panasonic Lumix DMC-FZ150 Owner's Manual page 138

∫ Changing the slide show settings
You can change the settings for slide show playback by selecting [EFFECT] or [SETUP]
on the slide show menu screen.
[EFFECT]
This allows you to select the screen effects when switching from one picture to the next.
[NATURAL], [SLOW], [SWING], [URBAN], [OFF], [AUTO]
•
When [URBAN] has been selected, the picture may appear in black and white as a screen
effect.
•
[AUTO] can be used only when [CATEGORY SELECTION] has been selected. The pictures
are played back with the recommended effects in each category.
•
[EFFECT] is fixed to [OFF] during the [VIDEO ONLY] slide show, or during a slide show of
[ ] in [CATEGORY SELECTION].
• Even if [EFFECT] is set, it does not work during a slide show of burst picture group.
•
Some [EFFECT] will not operate when playing back pictures displayed vertically.
[SETUP]
[DURATION] or [REPEAT] can be set.
Item
[DURATION]
[REPEAT]
[SOUND]
[OUTPUT]
•
[DURATION] can be set only when [OFF] has been selected as the [EFFECT] setting.
•
Even if [DURATION] is set, it does not work during a slide show of motion pictures or slide
show of burst picture group.
• [OUTPUT] will only appear when set to HDMI output and [3D PLAYBACK]
Playback/Editing
[1 SEC.]/[2 SEC.]/[3 SEC.]/[5 SEC.]
[OFF]/[ON]
[OFF]: There will be no sound.
[AUTO]: Music is played when the still pictures are played
back, and audio is played when the motion pictures
are played back.
[MUSIC]: Music is played back.
[AUDIO]: Audio (only for motion pictures) is played back.
[ ]: The slide show is output in normal format.
[ ]: The slide show is output in 3D.
- 138 -
Settings
(P60) is set to [ ].