∫ The available flash range
•
The available flash range is an approximation.
[AUTO] in
30 cm (0.99 feet) to 9.5 m
[SENSITIVITY]
(31.16 feet)
¢1 When the [ISO LIMIT SET]
∫ Shutter speed for each flash setting
Flash setting
‡
‰
¢2 It may vary depending on the [MIN. SHTR SPEED] setting.
•
In Intelligent Auto Mode, shutter speed changes depending on the identified scene.
•
In Advanced Scene Mode and Scene Mode, the shutter speeds will differ from those described
above.
Note
•
Do not bring the flash too close to objects or close the flash while it is activated. The objects
may be discolored by its heat or lighting.
•
Do not close the flash soon after the flash is activated prior to taking pictures due to AUTO/
Red-Eye Reduction etc. It causes a malfunction.
•
When you take a picture beyond the available flash range, the exposure may not be adjusted
properly and the picture may become bright or dark.
•
When the flash is being charged, the flash icon blinks red, and you cannot take a picture even
when you press the shutter button fully.
•
The White Balance may not be properly adjusted if the flash level is insufficient for the subject.
•
The flash effect may not be sufficient when using [FLASH BURST] in Scene Mode or when
shutter speed is fast.
•
When taking a picture with the flash, we recommend removing the lens hood. In some
cases it may not allow the scene to be illuminated properly.
•
It may take time to charge the flash if you repeat taking a picture. Take a picture after the
access indication disappears.
•
The Red-Eye Reduction effect differs between people. Also, if the subject was far away from
the camera or was not looking at the first flash, the effect may not be evident.
•
Flash is fixed to [Œ] when the [CONVERSION]
Wide
¢1
(P112)
is set to [AUTO].
Shutter speed (Sec.)
¢2
1/60
to 1/2000th
Recording
1.0 m (3.28 feet) to 5.1 m
(16.73 feet)
Flash setting
Œ
(P127)
is set to [
- 70 -
Tele
¢1
Shutter speed (Sec.)
¢2
1
to 1/2000th
] or [
].
C