Hitachi NR90GR - Power Tools 3-1/2'' Full Instruction And Safety Manual page 15

THE PUSH LEVER AND TRIGGER MUST MOVE
SMOOTHLY with pulling back the feeder knob.
Push lever
(2) Installing the battery.
Do not operate the push lever or trigger while installing
the battery.
Make sure the battery indicator light is flashing green.
If the battery indicator light is flashing red, the battery
doesn't have enough power and it needs to be charged.
Battery
BATTERY INDICATOR LIGHT
Flashing GREEN: Enough power remaining (The light
turns steady during operation).
Flashing RED: Insufficient power remaining (The light
turns steady during operation).
OFF: The battery is extremely empty. Charge the
battery.
(3) INSERT FUEL CELL INTO NAILER.
1 Pulling the latch and open the cell cover.
Latch
Trigger
Feeder knob
Handle
Latch
Insert
Pull out
Battery indicator
light
Cell cover
2 Insert the fuel cell into nailer.
3 Insert the stem of fuel cell into the hole of adaptor.
Adapter
Adapter
4 Close the cell cover.
(4) Remove the finger from the trigger and press the push
lever against the workpiece with pulling back the
feeder knob.
THE NAILER MUST NOT OPERATE.
Depress
push lever
— 15 —
Fuel cell
Stem
Fuel cell
Stem
Fuel cell
Cell cover
Do not pull trigger
Feeder knob
English