Battery Installation; Automatic Shut-Off; Battery Notice - VTech Flip For Phonics Parents' Manual

FLIP FOR PHO NICS™

BATTERY INSTALLATION

1. Make sure the unit is off.
2. Locate the battery cover on the back of the unit.
Use a coin or screwdriver to loosen the screw.
Install 2 new 'AA' (UM-3/LR6) batteries following
the diagram inside the battery box. (The use of
new, alkaline batteries is recommended for
maximum performance.)
3. Replace the battery cover and tighten the screw to secure the battery
cover.

BATTERY NOTICE

• Install batteries correctly observing the polarity ( +, - ) signs to avoid
leakage.
• Do not mix old and new batteries.
• Do not use batteries of different types.
• Remove exhausted or new batteries from the learning toy when it will
not be used for an extended period of time.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE BATTERIES.

AUTOMATIC SHUT-OFF

To preserve battery life, the FLIP FOR PHONICS™ learning toy will turn off
automatically after several minutes without input. The unit can be turned
on again by pressing the ON button.
NOTE: If for some reason the program/activity stops working, then please
follow these steps:
1. Please turn the unit off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit on. The unit will now be ready to play again.
If the problem persists, please call our Consumer Services Department at
1-800-521-2010 in the U.S., 1-800-267-7377 in Canada or 01235-546810 in the U.K.
WARNING: All packing materials such as tape,
plastic sheets, wire ties and tags are not part
of this toy and should be discarded for your
child's safety.
BATTERIES
13