Battery Installation; Getting Started; Battery Notice - VTech Counting Fun Elephant User Manual

GETTING STARTED

BATTERY INSTALLATION

1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom
of the unit. Use a coin or a screwdriver
to loosen the screw.
3. Install 4 new 'AA' (AM-3/LR6) batteries
following the diagram inside the
battery box. The use of new alkaline
batteries is recommended for maximum
performance.
4. Replace the battery cover and tighten
the screw to secure.

BATTERY NOTICE

• The use of new alkaline batteries is recommended for maximum
performance.
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the toy before being
charged (if removable).
• Rechargeable batteries are only to be charged under adult
supervision (if removable).
• Do not mix old and new batteries.
• Do not mix batteries of different types: alkaline, standard (carbon-
zinc) or rechargeable (nickel-cadmium).
• Only batteries of the same or equivalent type as recommended are
to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.