Understanding The Basics; Turning Your Tv On And Off; Selecting The Video Input Mode; Selecting A Channel - Insignia NS-22E430A10 User Manual

19" 720p LED HDTV/ 22" 1080p LED HDTV
5 Press OK/ENTER. Your TV scans for channels, if
necessary.
Choose your TV source
Antenna
Cable
Cable/Satellite box
Scan for channels
Move OK
ENTER
Select Antenna if using an antenna for standard or HD TV.
When the scan is complete, your TV displays the
first channel in the memorized channel list. You
can stop the scan by pressing EXIT.

Understanding the basics

Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.

Turning your TV on and off

To turn your TV on and off:
1 Press POWER. The power indicator turns
blue and your TV turns on.
2 To turn off your TV, press
TV turns off and the power indicator turns red.
Note
When your TV is turned off, power still flows into it. To
disconnect power, unplug the power cord.

Selecting the video input mode

Your TV supports multiple video input modes.
To select the video input mode:
1 Press INPUT to display the input source menu,
then press INPUT repeatedly or press
select a video input mode. You can select:
• TV
• AV
• S-Video
• Component
• HDMI
• VGA
2 Press OK/ENTER.
Digital Channels
0
Analog Channels
0
Select Previous
MENU
EXIT
POWER again. Your
or
www.insigniaproducts.com

Selecting a channel

To select a channel:
• To go to the next or previous channel in the
channel list, press CH and CH . Pressing one
of these buttons skips any channels that are
not in the channel list. The channel list was
created when you ran the Setup Wizard or
when you scanned for channels.
• To select an analog or main digital channel,
press the number buttons for the channel.
• To select a digital sub-channel, press the
number buttons for the main digital channel,
Exit
press , then press the number for the digital
sub-channel.
• To tune to the last viewed channel, press
RECALL.

Adjusting the volume

To adjust the volume:
• Press VOL+ or VOL– to increase or decrease the
volume.
• Press
to restore the sound.

Viewing channel information

To view channel information:
1 In digital TV mode, select a channel you want to
watch.
2 Press INFO to display information about the
program content, if available.
CH 14.1
BART-TV
TV-14 / IQ-NL
No Event Information
3 Press INFO again to close the display.
to
MUTE to turn off the sound. Press again
CC Off
704×480 Audio 1/1(L | R)
05/20/2005 08:00 AM Sound On
TV-14 / NL
15