Using And Configuring Sleep Mode - Toshiba M400 - Portege - Core 2 Duo 1.83 GHz User Manual

Once the computer is configured, you can place it into Hibernation
mode by either pressing the power switch or closing the display
panel, depending on the Hibernation options set.
Starting again from Hibernation mode
To start up the computer from Hibernation mode, press the power
switch until the on/off light glows green. The computer returns to
the screen(s) you were using.
If you put the computer in Hibernation mode by closing the display
panel, you can start it again by opening the display panel.

Using and configuring Sleep mode

To turn off the computer using the Sleep command:
1 Click Start, and then click the arrow next to the Lock button in
the lower-right part of the Start menu.
The Shut Down menu appears.
Start
(Sample Image) Shut Down menu
2 Click Sleep.
The computer saves the status of all open programs and files to
the memory, turns off the display, and enters into a low-power
mode. The on/off light blinks amber indicating the computer is
in Sleep mode.
Getting Started
Turning off the computer
Arrow
69
Shut Down Menu